Do you wish you had better speakers? Is your home theater hard to enjoy because of the sound? Consider getting some Polk in-wall speakers.

The speakers offer great audio quality, and they’re easy to set up and use. With them, you won’t have to worry about not being able to hear your favorite songs or watch movies.

The Best Polk In-Wall Speakers

Polk Audio has some fantastic speakers, and the line of in-wall speakers is no exception. Whether you’re looking to set up a home theater or listen to music, you can use the best Polk in-wall speakers.

Here are a few models to consider as you build your speaker setup. That way, you can fill all of your speaker needs.

RC85i Premium In-Wall Speakers

[amazon box=”B00006I5O6″ template= “horizontal”]

The RC85i Premium In-Wall Speakers offer fantastic sound reproduction and audio quality. They can provide depth to the sound, and dialogue is clear and easy to understand.

There’s a 1-inch tweeter and an 8-inch dynamic-balance woofer. A strong composite driver and a polymer cone help disperse the sound evenly over a room. That way, you can enjoy the feeling of surround sound.

These speakers work well with an existing system, but they also pair with other Polk speakers. They have a rubber seal that keeps moisture out of the speakers and helps offer a good response.

Installing these speakers is quick and simple. Once you install the speakers, you can paint them to match the room. Then, you can integrate the speakers into your space.

265-RT 3-Way In-Wall Speaker

[amazon box=”B004L9GWSK” template= “horizontal”]

Next is the 265-RT 3-Way In-Wall Speaker from Polk. The speaker uses a dynamic-balance woofer and a swivel mount silk dome tweeter to offer a clearer sound. It also helps deepen the bass.

This speaker can help with sound distortions, and it’s flexible. You can use it as a left or right speaker or a rear surround sound speaker. It works with a variety of channel systems that you may already use.

A rotating cam system comes with the speaker to minimize vibrations in the wall. You can easily mount and install the speaker, so it can fit in with an existing home theater or be part of your living room.

If you want to make the speakers blend in even more, the grille can withstand paint. That way, you can customize the color to match your walls.

255c-RT In-Wall Center Channel Speaker

[amazon box=”B004L9DGCK” template= “horizontal”]

While the previous speaker could work almost anywhere, you should combine it with the 255c-RT In-Wall Center Channel Speaker. You’ll need this speaker to put below your TV when setting up a home theater.

It’s a two-way speaker that can keep sound from distorting on reflective surfaces. The speaker comes with a tweeter as well as a mid/woofer.

You can use it with a variety of surround sound systems. The speaker is of great quality, and it can blend into your wall. That way, it won’t take up space in the room or theater.

It offers a clear sound and a deep bass, and it can blend timbres with built-in and traditional speakers. And installing the speaker is straightforward, and the speakers come with everything you need.

65-RT In-Wall Speaker

[amazon box=”B004L9DGDE” template= “horizontal”]

This speaker comes with the same high-quality design and features you get with other Polk Audio speakers. The 65-RT In-Wall Speaker works on the left, right, sides, and rear.

It has a 6.5-inch mid/woofer and a 1-inch tweeter. The design can help minimize sound distortion, so you can enjoy clear audio.

You can use the speakers with some of the most popular surround sound systems. That way, you can enjoy the sound from all directions, and you don’t have to waste space.

The speakers can fit into your wall easily, and installation is quick. And you can paint the grille to match the color on your walls.

How Do In-Wall Speakers Compare to Bookshelf Speakers?

Bookshelf speakers sitting on either side of a CD player

While installing in-wall speakers isn’t too hard, they do require more work than setting up bookshelf speakers. Because of that, you should consider how the two types of speakers compare.

Good quality in-wall speakers, such as the ones from Polk, can offer the same sound you’d get from bookshelf speakers. As long as you install the speakers correctly, you can enjoy the sound.

They’re a great option for rooms without a ton of extra space. If you don’t want to have to deal with setting up tables for each speaker, in-wall speakers are for you.

Related Read: Discover The Best Bookshelf Speakers Right Now

Can You Install In-Wall Speakers?

Another important thing to consider before you buy in-wall speakers is the installation process. You should only install the speakers yourself if you have experience with similar projects.

Having electrical or construction experience means you can do things more quickly. And you’ll have the tools you need to complete the task.

If you’ve never done any construction or electrical work, you may still be able to install the speakers. However, you’ll need to take each step slowly to make sure you don’t miss anything.

Consider the following steps if you decide you want to install Polk in-wall speakers yourself.

Gather some tools

Before you install your speakers, make sure you have the following tools:

Once you have all of these supplies, you can prepare for and complete the installation. Make sure you have enough time to go through each step.

Plan the speaker placement

Use a stud finder to locate the studs on the walls. That way, you can make sure you know where the speakers will fit.

The stud finder lets you do a basic inspection of the wall without having to open the wall. That way, you don’t have to cut into the wrong place.

Once you find a good spot, use a pencil to mark it. When you’re ready for the next step, you’ll know where to work. That way, you can plan the spot for each speaker in one go.

Use a test hole

Now, you can drill a small hole in the wall to test the space more in-depth. That way, you can ensure there’s plenty of space for your speaker to go when you install it.

Use a sturdy wire from a hanger or a similar item to check the area. Put the wire through the hole and move it around to look for any potential blockages.

Review the dimensions of your speaker so that you can check out the entire space. Then, you can repeat this step with the other speaker positions.

Cut the drywall

Once you verify that you have enough space and that your speakers won’t hit anything, you can cut the drywall. This is where things can get complex, so take it as slowly as you need.

You’ll need to use your level to verify that the cuts won’t result in your speakers sitting on an angle. Another way to help make the cuts is with some masking tape.

You can use the level when running the tape and place it along the edges. Whatever you do, make sure you’re confident before you cut the drywall.

Place the speakers

Now, you can put the speakers into the walls. You’ll need to run the speaker line through the wall, so it can help to call a professional for this step.

If you don’t want to do that, you can run the wire outside of the wall. Then, you can use carpeting or cabinets to hide the wires.

Screw the speakers into place so that they stay. Then, you can use paint on the edges to help them blend into the wall, or you can leave them as-is.

Fine-tuning

After you get the speakers into the walls, you can fine-tune them. One great way to tune the speakers is with the tweeter. You can make sure the tweeter faces where you’ll sit when you listen to music or watch movies.

Another thing to check is tone controls. When you have a speaker close to a corner, you will need to use the minus or cut position for your bass controls.

On the other hand, you should use those settings on your treble controls if the room doesn’t have upholstery. That way, you won’t have to worry about the sound not absorbing well.

How to Choose In-Wall Speakers

A man trying to decide which polk in-wall speakers to buy

Now that you know how to install Polk in-wall speakers, you should determine which speakers are the best for you. That way, you can give yourself the best listening experience.

Sound quality

You could have speakers with the best design and easiest installation process. However, nothing is worth sacrificing on the sound quality.

If possible, consider testing the speakers at a store before you buy them. Or ask people you know if they have speakers. You can listen to their setup to see if you like it.

While in-wall speakers can have some sound quality issues, they’re easy to resolve with proper installation. So don’t let how you use the speakers keep you from getting them.

Brand

Whether you get Polk Audio speakers or not, try to use the same brand throughout the room. Different manufacturers can use different voicing techniques.

Depending on how different the voicing is, the speakers may not sound good together. Getting your entire system from the same brand can help make sure the sound is good.

Look at each of the speakers above. They can all work well together, so you don’t have to worry about your setup.

Purpose

Another important factor is how you plan to use the speakers. The right speakers for a home theater aren’t always the same as those for general music listening.

You should also think about the room’s purpose and if it’s a dedicated theater or a general living area. While you may want to design a surround sound system for a theater, you may only need two speakers for a living room.

Make sure you choose speakers that can meet your audio goals. Then, you can enjoy listening no matter what you listen to or how you use the space.

Placement

When setting up your speakers, you should consider their placement in the room. Make sure you get speakers for the center, left, right, sides, and rear, especially if you’re building a home theater.

In other rooms, you should at least have a center speaker and one each on the left and right. That way, you can balance the sound.

Similarly, you should think about how many speakers you may need to fill the room. Then, you can ensure you have surround sound and can enjoy the audio.

Location

The room’s location within your home also matters. If the room is right next to other rooms, you should look for speakers with a back box.

A back box can help keep the sound from bleeding into adjoining rooms. This is especially crucial if the next room over is a bedroom or office. But it can also be important in any room.

Not only will a back box keep sound out of other rooms, but it can help direct sound into the correct room. Then, you can get even better audio quality.

Value

When shopping for in-wall speakers, you should also consider the expense and value. While you can find cheaper speakers, they probably won’t be the best option.

Instead, look for a combination of quality and budget. Then, you can get the best value for your money.

Whether you need one speaker or want to build an entire system, the value is crucial. Choosing a speaker with a good value can help you make the most of your purchase, and you can enjoy the setup.

Related Read: How to Choose the Best Wireless Surround Sound System for Your Needs

Listen Up

Polk Audio has some of the best equipment available, and Polk in-wall speakers are no exception. Whether you want to listen to music or build a home theater, Polk speakers are perfect.

You can find speakers that fit in your wall and can go in any position. Then, you can create a surround sound system. And you can enjoy the sounds you hear.

What kind of audio system are you thinking of for your home? Let us know in the comments below.